Toyota TUNDRA

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.

An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.

Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.

An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.

Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. The plastic fuel tube routed near metallic brake lines may chafe against the brake lines and become damaged, possibly resulting in a fuel leak.

A fuel leak in the presence of an ignition source can increase the risk of a fire.

Dealers will install protective materials and a clamp on the fuel tube, free of charge. Owner letters were mailed November 6, 2024. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 23TB09/23TA09.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Lexus LX600 vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.

A loss of drive power increases the risk of a crash.

Dealers will replace the engine assembly, free of charge. Owner letters were mailed between December 17, 2024 and February 19, 2025. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TB07/24TA07 and 24LB04/24LA04.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra vehicles equipped with a Panoramic View Monitor (PVM) system. The parking assist electronic control unit (ECU) software may prevent transmission of the rearview camera signal during cold weather, preventing the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

A rearview camera that does not display an image reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.

Dealers will reprogram the parking assist ECU software, free of charge. Owner notification letters were mailed June 2, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA04.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles. The flange nuts on the axle shaft sub-assemblies can loosen over time and potentially cause one or both axle shaft sub-assemblies to separate from the axle housing.

Axle shaft separation can cause a loss of vehicle stability and brake performance, increasing the risk of a crash.

Dealers will inspect the rear axle assembly, tighten the axle flange nuts, and replace any damaged axle-related components if necessary, free of charge. Owner notification letters are expected to be mailed July 15, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA05.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. A software error in the combination meter's electronic control unit (ECU) may cause the Instrument Panel LCD display to go blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

A blank display will not show critical information such as the speedometer or warning lights, increasing the risk of a crash.

Dealers will update the combination meter ECU software, free of charge. Owner notification letters are expected to be mailed April 17, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TA02.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.

Unexpected vehicle movement can increase the risk of a crash.

Dealers will update the transmission control ECU software, free of charge. Owner notification letters were mailed April 8, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TA02 and 24LA02.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tundra vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause a main bearing to fail, which can result in an engine stall and loss of drive power.

A loss of drive power increases the risk of a crash.

Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Interim letters notifying owners of the safety risk were mailed July 23, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB14 and 25TA14. This recall expands previous NHTSA recall numbers 24V381 and 25V767.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota Tundra and Sequoia vehicles. Electrical interference within the power supply circuit may cause the vehicle's electronic stability control system to be deactivated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems."

Deactivation of the vehicle stability control system can increase the risk of a crash in certain conditions.

Toyota will notify owners, and dealers will update the vehicle's software, free of charge. The recall began March 14, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0H. Note: This recall has been superseded by 18V-685. The software remedy for 18V-685 includes the updates to the software for this recall.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota Tundra standard and long bed trucks equipped with a spray-in bed liner. The load carrying capacity modification label may have been incorrectly calculated. If the label is followed, the vehicle may be overloaded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

An overloaded vehicle can increase the risk of a crash.

Toyota has notified owners, and provided corrected load carrying capacity labels, free of charge. The recall began on January 24, 2019. The recall number is J08. Owners may contact Toyota customer service at 1-888-270-9371.

Gulf States Toyota, Inc. (GST) is recalling certain 2023 Tundra pickup trucks equipped with non-skid spray-on bed liners. The load carrying capacity modification label may indicate less weight than the actual total weight of accessories installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.

GST will mail replacement labels to owners, free of charge. Owner notification letters were mailed January 10, 2023. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 22R2.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Sequoia Hybrid, Tundra and Tundra Hybrid vehicles. The passenger-side front and rear tires may have inner sidewall damage, which can cause a sudden loss of tire pressure.

A sudden loss of tire pressure can result in a loss of vehicle control, increasing the risk of a crash.

Dealers will inspect and replace the tires as necessary, free of charge. Owner notification letters were mailed December 5, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 24TA12.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2020 Toyota Tundra vehicles equipped with LED headlight assemblies. Due to a wiring error, the front turn signals may not flash brightly enough. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

If the turn signals or hazard lamps do not flash brightly enough, other drivers may fail to see that the turn signal or hazard lamp functions have been activated, increasing the risk of a crash.

Toyota will notify owners, and dealers will modify the wire harness connected to the front turn signal bulbs free of charge. The recall began August 17, 2020. Owners may contact Toyota customer service at 1-800-270-9371. Toyota's number for this recall is 20TB12/20TA12.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.

Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.

Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Tundra and Tundra Hybrid vehicles equipped with a spray-on bed liner accessory. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

An overloaded vehicle increases the risk of a crash.

Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed October 29, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TA11.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. Incorrect programming of the parking-assist electronic control unit (ECU) software, may cause the front camera image to appear on the multimedia display instead of the rear camera image when the shifter is placed into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

A rearview camera that fails to display the correct image can reduce the driver's rear view, increasing the risk of a crash.

Dealers will reprogram the parking assist ECU, free of charge. Owner notification letters were mailed July 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA07.

Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2013-2017 Toyota Tundra and Sequoia vehicles accessorized with Southeast Toyota accessory 20-inch Rockstar wheels installed by Southeast Toyota or a Southeast Toyota dealer. The Rockstar wheels were installed with lugnuts that may crack and detach.

Lugnuts that crack and detach may cause the wheels to separate from the vehicle, increasing the risk of a crash.

SET will notify owners, and dealers will install new replacement lugnuts, free of charge. The recall began June 23, 2017. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET17A.

Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

An overloaded vehicle increases the risk of a crash.

SET will mail a new modified label, free of charge. Owner notification letters were mailed December 18, 2023. Owners may contact SET's customer service at 1-866-405-4226. SET's number for this recall is SET23B.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Tundra, Tundra Hybrid, and Sequoia Hybrid vehicles. The steel chain used to secure the spare tire to the underside of the vehicle may have been insufficiently welded.

Chains that are not welded sufficiently can break and allow the spare tire to detach, increasing the risk of a crash.

Dealers will replace the spare tire carrier assembly, free of charge. Owner notification letters are expected to be mailed August 14, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TB06/23TA06.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.

A loss of drive power increases the risk of a crash.

Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Interim letters notifying owners of the safety risk were mailed December 16, 2025. Additional letters will be sent once the final remedy is available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB14 and 25TA14. Lexus' numbers for this recall are 25LB07 and 25LA07. This recall expands previous NHTSA recall number 24V381.

Southeast Toyota Distributors, LLC (SET) is recalling one 2026 Tundra truck. The current load carrying capacity modification label is incorrect. As such, this vehicle fails to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

An incorrect load carrying capacity modification label may lead to improper loading of the vehicle, increasing the risk of a crash.

SET will provide the owner with a new load carrying capacity modification label, free of charge. An owner notification letter is expected to be mailed September 4, 2026. The owner may contact SET's customer service at 1-866-405-4226. SET's number for this recall is SET26A.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles that may be equipped with a Toyota genuine accessory tonneau cover. The tonneau cover attachment joints may come loose and allow the cover to detach.

A tonneau cover that detaches while driving can become a road hazard, increasing the risk of a crash.

Owners of the subject vehicles will be notified by first class mail to return their vehicles to a Toyota dealer. Dealer will install new hardware (bolts, spacers, washers, nuts, rubber washers and cotter pins) to the existing bracket and tonneau cover. If the tonneau cover has tears or splits at the mounting holes to the extent that new hardware cannot be installed, it will be replaced with a new tonneau cover and hardware. Owners will receive a notice once the remedy becomes available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TB03/23TA03.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016-2017 Tundra vehicles equipped with a resin rear step bumper and resin reinforcement brackets (vehicles with chrome step bumpers are not affected). In the event of an impact to the corner of the bumper, the resin bracket may be damaged but not be noticed.

If a person steps on the corner of the bumper that is damaged, a portion of the bumper may break away, increasing the risk of injury.

Toyota will notify owners, and dealers will replace the resin rear bumper reinforcement brackets with steel ones, and replace the rear bumper tread, free of charge. The recall began on May 21, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is H0C.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2021 Tundra vehicles. The headlight electrical circuits may power the high and low beams simultaneously, which could overheat the electrical connector.

An overheated electrical connector can increase the risk of a fire.

Dealers will modify the engine wire harness assembly and replace any damaged bulb, bulb connector, and/or headlight assembly as necessary, free of charge. Owner notification letters were mailed April 25, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB06 and 21TA06.